Biopharmaceutical waste gas purification, chemical plant waste gas purification: amine, sulfide, acid and alkali waste gas, ethylene glycol, evaporative organic solvents, etc; 7. Waste gas purification in welding workshop: carbon monoxide, carbon dioxide, sulfur dioxide and other welding dust, particles, benzene organic matter, nitrogen oxides, ozone, etc; 8. Waste gas purification of furniture factory: benzene waste gas treatment, toluene waste gas treatment, xylene waste gas treatment, formaldehyde, etc; 9. Waste gas purification of power plant: sulfur dioxide, nitrogen dioxide, carbon monoxide, unburned hydrocarbons, soot particles, dust, etc; 10. Rubber plant waste gas purification: organic sulfide, benzene waste gas treatment, toluene waste gas treatment, xylene waste gas treatment, organic gas containing phosphorus, phenol, ketone and other toxic and harmful ingredients, alkanes, industrial dust, etc.

In order to improve the specialized bacteria with the ability of efficient degradation of pollutants, it is necessary to select the source of the bacteria according to the nature of the pollutants in the policy. For the easily degradable waste gas, alkanes, olefins, alcohols and organic substances, or the odorizing waste gas with complex treatment components, there are sulfides. In urban sewage treatment plants, inoculation strains are generally selected, which can adapt to pollutants and remove pollutants efficiently in a relatively short time. Because activated sludge contains a wide range of bacteria that can degrade a variety of organic compounds, it is an ambitious domesticated source of bacteria for biotrickling filters to purify easily degradable organic waste gases.

UV photolysis uses high-energy UV light beam to differentiate oxygen molecules in the air to produce free oxygen (i.e., active oxygen). Because free oxygen carries unbalanced positive and negative electrons, it needs to combine with oxygen molecules, and then ozone occurs. Ozone has strong oxidizability. Through ozone, organic waste gas and malodorous gas are subject to synergistic photolysis and oxidation, so that organic waste gas Odor gas substances are degraded into low molecular compounds, water and carbon dioxide. 2. The waste gas purification tower for washing method uses the neutralization method, absorption method, water washing method, etc. commonly used now, and the packed turbulent ball tower for acid-base neutralization. This equipment has a large processing ability, small resistance, and high absorption efficiency. It is a gas purification equipment widely used now. The treated gas is then separated by gas and water for dehydration treatment, and then discharged into the atmosphere through the discharge pipeline, Then reach the national emission regulations.

Carbon and nitrogen compounds, some impurities, such as heavy metals, mercury, mercury, lead, and carbon oxides, are harmful to human body, most of which are slow major Activated carbon adsorption tank Slow poisoning Activated carbon adsorption tank manufactor Cheng, affects the human hematopoietic system, and the respiratory system will also be affected. How does vinyl chloride, the monomer used to produce PVC in plastic factories, or ethylene, the monomer of polyethylene, come out with the exhaust gas? Ethylene is a kind of plant hormone, which can promote the ripening of plant fruits, and in case of excess, it will lead to defoliation and even death of plants. It will cause disasters to the surrounding vegetation. If the plants are gone, the rest will be a thing of the past.