Biopharmaceutical waste gas purification, chemical plant waste gas purification: amine, sulfide, acid and alkali waste gas, ethylene glycol, evaporative organic solvents, etc; 7. Waste gas purification in welding workshop: carbon monoxide, carbon dioxide, sulfur dioxide and other welding dust, particles, benzene organic matter, nitrogen oxides, ozone, etc; 8. Waste gas purification of furniture factory: benzene waste gas treatment, toluene waste gas treatment, xylene waste gas treatment, formaldehyde, etc; 9. Waste gas purification of power plant: sulfur dioxide, nitrogen dioxide, carbon monoxide, unburned hydrocarbons, soot particles, dust, etc; 10. Rubber plant waste gas purification: organic sulfide, benzene waste gas treatment, toluene waste gas treatment, xylene waste gas treatment, organic gas containing phosphorus, phenol, ketone and other toxic and harmful ingredients, alkanes, industrial dust, etc.

In order to ensure the normal operation of the dedusting system and avoid environmental pollution again, the dust collected by the deduster should be properly treated. Its handling principle is to cut two high quality Activated carbon adsorption tank Secondary fugitive dust Activated carbon adsorption tank company Protect the environment and recycle, turn harm into benefit, turn waste into treasure, and improve economic benefits. According to the production process conditions, dust nature, recycling value, and the amount of dust to be treated and other factors, on-site recycling, centralized recycling and centralized waste can be selected. How to deal with noise and coal mine dust in workshop? Coal mine dust is produced by various coal particles and rock particles in the process of coal production.

How to deal with the waste gas produced by the food factory In the workshop of the food processing factory, some organic waste gas and waste water will often occur, and there will also be malodorous gas. The waste water needs to be purified and treated to be qualified, and the waste gas must also be treated to be qualified before it can be discharged. As a food factory, there are three main types of pollution, including wastewater, waste gas and solid waste. Aromatic compounds such as benzene, toluene and styrene are the main components of waste gas pollution in food factories. Generally, the following three methods are selected for waste gas treatment in food factories.

Previously, activated carbon adsorption was selected for rubber vulcanization waste gas, and the main treatment fields include: production of electronic components, production of batteries (batteries), pickling workshop, laboratory exhaust, metallurgy, chemical plants, pharmaceutical manufacturers, coating workshops, food and brewing, furniture production, etc. It is especially suitable for waste gas treatment of rubber vulcanization, foaming and rubber refining processes in rubber industry, tire industry, seal manufacturing enterprises, rubber and plastic industry, etc. The adsorption characteristics of activated carbon are mainly used to adsorb the waste gas of organic solvents such as benzene, alcohol, ketone, ester and gasoline. However, since the activated carbon after full adsorption is a hazardous waste, it needs to find a professional solid waste or hazardous waste treatment unit for treatment, and a hazardous waste treatment agreement needs to be signed. Therefore, activated carbon adsorption has been gradually replaced by other waste gas treatment equipment, Before understanding the rubber vulcanization waste gas treatment equipment, let's first understand in which process the waste gas mainly occurs.