What are the reasons why the fan of the lampblack purifier does not turn!
In daily life, we all know that the kitchen is a very complex environment, not only to deal with food materials, but also to deal with soot. In the kitchen, lampblack purifier is indispensable. It can effectively reduce the smoke and odor in the air. If inferior fume purifier is used during cooking, problems such as loud noise and small air volume will occur. What problems will we encounter in the use process?
Power wiring
First, check whether the power supply is properly connected and whether the power wiring is loose. If the power wiring is found loose, it will lead to poor power contact and the fan will not rotate. Therefore, when using, be sure to connect the power connector. In addition, if the fault is caused by poor quality of the fume purifier, the product quality should be checked.
electrostatic discharge
Electrostatic discharge will occur after the fume purifier is used for a period of time. The main reason is that the dust, grease and oil dirt in the air enter the oil smoke purifier and generate electrostatic discharge in the electric field, which causes the electric field to fail to work normally. If it is not handled in time, the electric field will be short circuited.
Solution: In general, the problem that the fan of the oil smoke purifier does not rotate during use will occur. To avoid this situation, it is recommended that you clean the oil fume purifier regularly during use. When cleaning, connect the power plug with the power socket of the fume purifier, and turn on the power switch.
Electric field instability
Electric field instability is a common fault of oil smoke purifier, because electric field is prone to problems. If the electric field is unstable, it will affect the purification efficiency and service life of the electric field. In daily life, the electric field of the oil fume purifier is easily affected by external factors, such as weather changes, temperature changes, etc., resulting in the instability of the electric field.

Screen clogging
When the filter screen of the kitchen fume purifier is blocked, the purification efficiency will be reduced and the air volume will be reduced. It is necessary to clean the filter screen of the fume purifier regularly. So how do we clean the fume purifier?
1. If it is a small fan, it can be wiped with a clean wet cloth. For cleaning large fans, it is recommended to use professional cleaning agents and choose a suitable cleaning time.
2. If the air volume is reduced due to the blockage of the filter screen, it is necessary to open the motor to check whether it is caused by the blockage of the filter screen. Then clean the filter screen.
3. If the air volume decreases because the motor in the fan is damaged, we can replace it with a new motor to solve the problem.
4. If the air volume decreases due to other reasons, only a new motor can be replaced.
equipment failure
The maintenance of kitchen fume purifier is also very important. If the equipment fails, it will directly affect the normal use of users. In the process of use, if the fan of the oil smoke purifier does not rotate, check whether there is a fault with the fan, and remove the fault in time.
When we encounter the problem that the fan of the lampblack purifier does not turn when cooking, we should first check whether the lampblack cannot be fully burned because the fan of the lampblack purifier does not turn, which requires us to use professional maintenance tools to disassemble the equipment.
If problems occur during treatment, the first thing to do is to replace the equipment. If the equipment is not replaced in time, it will not only affect the normal use of users, but also cause energy waste. So when we encounter these problems, we must solve them in time.