Because of the formation Waste gas treatment equipment There are many reasons for oil leakage, including design, production, operation and maintenance. Therefore, leakage prevention and control of waste gas treatment equipment is a systematic project.

    The first thing to do is to find a solution to the problem from the design, and then carry out targeted management according to the principles of sealing, blocking, guiding and pressure equalization. However, improving the design and manufacturing quality of equipment is the key to deal with oil leakage of waste gas treatment equipment.  

    Change: For unreasonable sealing structure, use sealing materials that are not easy to leak or improve the pressure difference of the system, redesign the sealing structure, change the liquid lubricating materials into solid or semi fluid lubrication, etc., to meet the requirement of no leakage.

    Replace: Replace the seals and pipe fittings with damaged or poor performance of waste gas treatment equipment.

    Lead: with the help of external force, lead out some leaked media, recover or directly lead back to the oil tank. Ways to prevent oil leakage of waste gas treatment equipment.

    Plugging: For sand holes and holes on the shell pipe wall caused by quality defects such as design and manufacture, welding or bonding is generally used for plugging.  

    Repair: repair the parts causing leakage, weld and glue holes and cracks, scrape and grind the sealing parts, and improve the accuracy of the sealing surface

    Management: strengthen management and inspection, timely discover and manage at any time. The operating principle of the waste gas treatment equipment - activated carbon adsorption desorption equipment is to convert the separated pollutants in the gas into a kind of substance, which is harmless, so as to achieve the purpose of purifying the gas.

    It belongs to countercurrent differential touch tower body packing, which is a fundamental two-phase gas-liquid touch component. After entering the gas outside the tower, the gas enters the packing layer, and has the main liquid spray of the liquid in the liquid film on the package from the top of the upper packing layer. The gas flows through the gap packing and the packing film, and the reactive packing layer can be touched to absorb or neutralize, which can provide enough surface area for gas flow without forming too much resistance, After absorption or neutralization of the gas passing through the collected demister, the air is discharged from the tower!