Organic Waste gas treatment equipment There are many kinds of them, and their working principles are also different. Organic waste gas is the main component of gaseous pollutants from all occupations. The main components are toluene, non methane total hydrocarbon, ethyl acetate, acetone, butanol, xylene, toluene, etc. The composition of waste gas varies with different occupations.
Operating principle of UV photo oxygen catalytic organic waste gas treatment equipment: special high-energy and high ozone UV light beam is used to illuminate the waste gas, and the molecular chain structure of pyrolysis industrial waste gas such as ammonia, trimethylamine, hydrogen sulfide, methyl sulfide, methyl mercaptan, methyl sulfide, butyl acetate, ethyl acetate, dimethyl disulfide, carbon disulfide and styrene, sulfide H2S, VOC, benzene, toluene, xylene, Under the illumination of high-energy ultraviolet beam, the molecular chain of organic or inorganic macromolecular odor compounds will be degraded and transformed into low molecular compounds, such as CO2, H2O, etc. Use high-energy and high ozone UV light beam to differentiate oxygen molecules in the air to produce free oxygen, that is, active oxygen. Because the positive and negative electrons carried by free oxygen are unbalanced, it needs to combine with oxygen molecules to produce ozone. UV+O2 → O -+O ＊ (active oxygen) O+O2 → O3 (ozone). As we all know, ozone has a very strong oxidation effect on organic matter, and can quickly and successfully remove industrial waste gas and other irritating odors. Industrial waste gas treatment uses exhaust equipment to input into the purification equipment. The purification equipment uses high-energy UV beam and ozone to carry out cooperative differentiation and oxidation reaction on industrial waste gas, so that the industrial waste gas can be degraded into low molecular compounds, water and carbon dioxide, and then discharged outside through the exhaust duct.
In the industrial production of chemical industry, medicine, mineral resources and other industries, organic waste gas will be produced. If these waste gas can not be effectively treated, it will seriously pollute the environment over time, causing haze, acid rain and other attacks, endangering the ecological balance, and bringing various threats to human health. In addition, these organic waste gases are mostly flammable and explosive gases, which simply brings a variety of potential safety hazards, As a production enterprise, it is necessary to equip corresponding organic waste gas treatment equipment to carry out useful purification and recovery.
Among various organic waste gas treatment methods, adsorption is a relatively simple and low-cost treatment method. The common method is to use the adsorption function of activated carbon to purify the organic waste gas, because the replacement of activated carbon will increase the operating cost, After research, people have produced a new type of adsorption medium - GLSD adsorbent. This adsorbent can effectively absorb toxic and harmful components in organic waste gas and acid waste gas. Compared with activated carbon as the adsorption medium, it is not only more convenient and better purification, but also more extensive and economical in the treatment of organic waste gas, It has become the best choice for enterprises to purify and treat organic waste gas.
