Place of use:

It is applicable to the workplaces producing smoke such as electric arc welding, carbon dioxide shielded welding, MAG welding, carbon arc gouging welding, gas fusion cutting and special welding.

Structure composition:

The main components include: universal vacuum arm, high-temperature resistant vacuum hose, dust hood (with air volume regulating valve), flame retardant screen, flame retardant high-efficiency filter element, pulse back blowing device, pulse solenoid valve, differential pressure gauge, clean room, active carbon filter, ash settling drawer assembly, flame retardant sound absorbent cotton, new Korean casters with brakes, fans, motors and electric control box.

working principle:

The welding fume and exhaust gas are sucked into the air inlet of the equipment through the universal dust hood under the attraction of the fan. The flame arrester is set at the air inlet of the equipment. The spark is blocked by the flame arrester, and the soot gas enters the settling chamber. First, the coarse dust is directly dropped to the ash hopper by gravity and upward airflow, and the fine dust is trapped on the outer surface by the filter element. After the clean gas is filtered and purified by the filter element, From the center of the filter element, the clean air flows into the clean room. After being further purified by the activated carbon filter, the clean air is discharged through the outlet after reaching the standard.

Equipment advantages:

1. It can be flexibly moved to any position of the plant, free from the constraint of unfixed dust generating points.

2. The equipment is equipped with universal casters to facilitate the positioning of the equipment.

3. Unparalleled treatment efficiency: under the rated treatment air volume, the soot removal rate is ≥ 99%, and the clean air discharged after treatment can be directly recycled in the workshop.

4. The filter element type purification method is adopted, and the highly efficient Germany imported high-precision (PTFE) membrane covered filter material has high purification efficiency, low cost of consumables, no need for frequent replacement, and saves environmental protection.

5. The equipment is equipped with an automatic pulse ash cleaning device to maintain a constant air suction and purification capacity. (Optional as required)

6. The specially designed control system of the equipment is safe and stable, and is equipped with high-voltage leakage protection.

7. Using the universal suction arm, the welder can easily and flexibly reach the dust generating point in any direction 360 degrees from any position hovering in the three-dimensional space, so that the welder can work more efficiently.

8. For special working conditions, the corresponding dust hood can be selected according to the site.